MasiBloom Top Side Laptop Sticker Decal for 13" 13.5 inch Microsoft Surface Laptop 3 & 2 & 1 (2019/18/17 Released), Not Compatible with Surface Book (for Surface Laptop, Blue Castle)

I like my Surface Laptop 2. It's a thin light, solid laptop. My one complaint is that the dark metal case is slippery and easily collects fingerprints. I ordered this Masino Protective Decal to add a little protection and add a little grip so that the laptop would not slide around in my lap. The carbon fiber looks good on the dark gray, blends right in. I applied the bottom piece first and did not get it perfectly aligned. I tried 2 or 3 times and finally got the bottom piece close but not perfect. I did get the top piece perfectly aligned. I can't speak for the long term wear and tear, I've only had it for few a days. So far I like the look and feel. I little tricky to get the decal perfectly aligned but if you do it looks great.

Although mine did come with a cut out for the logo (I got the granite looking sticker), it does not have a cut out for the camera. Also the edges do not align very well. It’s about a quarter inch to short width wise and slightly too long for the height. Also, although this was an overlook on my account, it does not come with a bottom sticker, which is super annoying. The image quality of the granite is nice. However, I think it unfair to market this as a protective sticker when it does not cover the whole top and does not come with a bottom sticker. It just seems like an overpriced sticker. Overall I would not recommend.

I'm really happy with my decal - more so than I anticipated to be honest. It is way thicker than I expected it to be. It was super easy to apply - got it perfect the first go. And although I've only had it on for short time, the adhesion seems to be good - but only time will tell on that. It fits perfect as well. I had read that the size is wrong, but I suspect that's because the wrong product was ordered for the device. This is literally a perfect fit for my Surface Laptop 2. I wasn't expecting to be disappointed, but I'm WAY happier than I thought I'd be. I kinda figured for $11 it was worth the gamble. It paid off in this case! I got the blue and pink feathered decal.

This shipped really quickly and in very nice packaging to protect the sticker. I was really surprised by the quality of the sticker, it’s much thicker and not the plain cheap plastic I was expecting. Definitely worth the price.HOWEVER. There is no camera cut out. I at first used a single hole puncher (I felt brilliant) but because the sticker doesn’t fit the laptop, I missed and had to cut it with scissors (not so brilliant). It does have a cut out for the logo though. For reference, I have a 13.5” (I think) Surface Book 2. It’s a smidge too long in height (so if I were to go into tablet mode, a bit of the sticker would hang off. Maybe less than a cm but because it’s thick it’s obvious) and too short in width. Kind of a bummer, but the quality is great. I would just be careful with the camera hole punching idea, maybe place the sticker first, lift the corner so you know exactly how it fits on your device, then punch it even though it’s sticky.Thanks!

…and I grant this product (5) stars. I purchase the “Wood- Yellow with brown lines” because, I wanted the look of a real wood cover without paying the high price or killing trees. I can say with confidence that this product ultimately achieves that look. It is easy to apply although I did encounter bubble. But, it was nothing I couldn’t resolve by reapplying it and it also wasn’t very noticeable unless you were up close. The supplied wipes to clean the cover of the Surface Laptop are pretty much useless though. Moreover, it is quite durable and smooth. I haven’t yet tested to see if it leaves residue after leaving it on over a long period of time. But, overall, it’s a good buy and is a keeper! Once again, another happy Amazon customer.Until Next Time,-Computer Science Student

Easy to install but don’t buy if you have OCD or even any attention to detail.Not sure if the picture is clear but the skin isn’t cut properly around the Microsoft logo so there’s a gap on one side and if you line the skin up against the logo you then have over hang on one side so it will just get ripped apart with wear.It’s also left a gap at the back of the laptop which I’m less bothered with but still annoyed

Although the graphic is beautiful , it does not fit perfectly . It’s either too long on one side or there’s a way to place it squarely but it doesn’t protect the full cover of the surface . I sacrificed the top edge for it to cover completely everywhere else . I would have liked to have the “board” that’s shown in the instructions included with my package . I folded the thick instruction paper to create a thick enough “board “ to assist with ironing out the bubbles . On the plus side the vinyl seems thick enough and sturdy . I had to remove an insane amount of times to get it as even as possible because there are no tabs to assist with guiding or anything . As i removed it multiple times there was no residue or funky sticky material left on the surface of the laptop so I guess that’s a win. All in all I’m not super dissatisfied but I’m going to remove it soon because of the exposed edges , I just know it .

In overall, this is so hard to install to avoid bubbles and to have it centered on the cover of the computer, to have the edges even and the windows sight centered too, a complete challenge.After all the struggle, the top ends up nice and appearance is nice.Issue with the bottom, where the trim is not to the design of my surface laptop and the holes for the rubber pads didn't match. So I needed to alight two on one side and cut the sticker decal not to cover the other two rubber pads of the base of my computer.

I bought this decal to protect and personalize my laptop, and I was expecting a high quality printing in line with my expensive and brand-new tool laptop. The definition of the image is extremely poor and pixelated that not even my home printer has that bad quality, especially for the price!!!! I could accept the bad quality for one pound....and not even, you have texturized high quality prints for the same price!!

I carefully checked the dimensions, it did fit the surface laptop 3. Installation was easy, i was able to re position it several times to get it right, looks very durable and has a nice fit and finish to it. I kept the middle square where the surface logo would be because i wanted protection.

2 stars only because it fits nicely but the marble design is very pixelated and looks like it was an expanded/stretched version of a 5x9 picture. Good concept but not carried out properly.

Cool design and nice quality. The sticker is glossy and it makes my laptop look luxury. I like it. Also, it is easy to stick on with a clear instruction paper. Recommend this product :)

Love it!Looks amazing - better than pictured :)

It doesn’t fit properly

Side don’t stick too good and once it’s on it leaves sticker mark on the laptop

Really easy to stick down and has a really nice premium feel. Fits the surface laptop 2 perfectly!

Super easy to install. It's a great buy to prevent scratches to my new Microsoft Surface 2 Laptop

The top of the sticker fits perfectly fineBut the bottom is not the correct size

Not compatible with my Microsoft Surface Laptop 2

Looks amazing! Had it for a while no sign of wear. Good buy.

Nice and good